Revised Guide for using Android Emulators
- 45937
- 365
-
- Last Comment
In my previous guide I had strived to make it noob-proof,to cover almost every possible scenario. It seems all I ended up doing was to complicate it further. U know what they say abt the road to hell being paved with good intentions & all that…..
Anyways without further ado…
For the time being I will concentrate only on Bluestacks as its the only one that works with FC. Anyways operating Youwave is child’s play.
Rooted/cracked Bluestacks 0.9.6 (removed from official site): www.mediafire.com/download/y287bsy7zio4msg/Blue... abt 250MB .
It does not prompt for purchase nor does it download any apps on its own.
This is the software that will effect all the changes :http://www35.zippyshare.com/v/94607262/fil...ml
P.S. Dont mess around with the experimental features.
After every recharge
1.Run BS Tweaker as Administrator
2.Exit(Full Stop)BS*
3.Delete Data & SDCard Files(click OK on both)
4.Start BS
5.After it is completely launched,click to change GUID,Google Advertising ID & Android ID one after the other.
6.Exit(Full Stop)BS so that diff. values can be overwritten
7. Now Start BS & do ur stuff.
8. Rinse & repeat after every recharge.
Screenshots to illustrate the above steps:
initally it was working bro, but now i get these errors
1) when i press change for GUID i get an error “failed to set data for boot parameters”
2) the change advertising id is disabled
3)factory reset, i get an error " error: can’t delete file" – C:programdata/bluestacks/android/data.sparsefs/map
but i am able to delete it manually
hey bro i am getting blank screen in youwave from last 1 week.before 1 week youwave was working fine.i have tried with reinstalling and also downloaded 3.20 from ur given link but same issue.any solution?
karthi4052752 wrote:
initally it was working bro, but now i get these errors
1) when i press change for GUID i get an error “failed to set data for boot parameters”
2) the change advertising id is disabled
3)factory reset, i get an error " error: can’t delete file" – C:programdata/bluestacks/android/data.sparsefs/map
but i am able to delete it manually
While deleting data Bluestacks must not be running. Whereas in order to change different parameters Bluestacks must be running. I think ur Bluestacks installation is hosed. A reinstallation is may be needed.
sdyado wrote:
hey bro i am getting blank screen in youwave from last 1 week.before 1 week youwave was working fine.i have tried with reinstalling and also downloaded 3.20 from ur given link but same issue.any solution?
Did you install Virtualbox or Genymotion in that time period? The three are mutually incompatible. Uninstall Youwave & reboot ur system. Then try reinstalling it. While applying crack/installing Youwave had to disabled internet? Try 3.06 . 3.20 is a bit buggy.
how to create many accounts for gosf goibibo
1000 gocash offer on bluestack,
i dont know about bluestacks cracking,tweaker
pls help me
for using these emulators, do we need to root our device ?
Voted Up for the Effort,, Appreciate it
very useful bhai awesome………..kg for your effort
Dr Anshuman wrote:
karthi4052752 wrote:
initally it was working bro, but now i get these errors
1) when i press change for GUID i get an error “failed to set data for boot parameters”
2) the change advertising id is disabled
3)factory reset, i get an error " error: can’t delete file" – C:programdata/bluestacks/android/data.sparsefs/map
but i am able to delete it manually
While deleting data Bluestacks must not be running. Whereas in order to change different parameters Bluestacks must be running. I think ur Bluestacks installation is hosed. A reinstallation is may be needed.
s, tryied the way u said, but still the same errors, my installation is from you link….
should i reinstall???
EDIT: tried reinstalling both , still same
I hv made a short video explaining the above steps abt 1.5MB. This is the last time I spend anytime on this. Should be really easy to follow this. I wont respond to any more PMs. http://www49.zippyshare.com/v/97878352/fil...ml Feel free to skip/Fast Forward the “initialisation” phase.
Dr Anshuman wrote:
I hv made a short video explaining the above steps abt 1.5MB. This is the last time I spend anytime on this. Should be really easy to follow this. I wont respond to any more PMs. http://www49.zippyshare.com/v/97878352/fil...ml Feel free to skip/Fast Forward the “initialisation” phase.
karthi4052752 wrote:
Dr Anshuman wrote:
karthi4052752 wrote:
initally it was working bro, but now i get these errors
1) when i press change for GUID i get an error “failed to set data for boot parameters”
2) the change advertising id is disabled
3)factory reset, i get an error " error: can’t delete file" – C:programdata/bluestacks/android/data.sparsefs/map
but i am able to delete it manually
While deleting data Bluestacks must not be running. Whereas in order to change different parameters Bluestacks must be running. I think ur Bluestacks installation is hosed. A reinstallation is may be needed.
s, tryied the way u said, but still the same errors, my installation is from you link….
should i reinstall???EDIT: tried reinstalling both , still same
I was not able to reproduce these errors but could u try with this new version? If the same error persists uninstall Bluestacks & try again. http://www33.zippyshare.com/v/60532505/fil…ml
karthi4052752 wrote:
Dr Anshuman wrote:
karthi4052752 wrote:
initally it was working bro, but now i get these errors
1) when i press change for GUID i get an error “failed to set data for boot parameters”
2) the change advertising id is disabled
3)factory reset, i get an error " error: can’t delete file" – C:programdata/bluestacks/android/data.sparsefs/map
but i am able to delete it manually
While deleting data Bluestacks must not be running. Whereas in order to change different parameters Bluestacks must be running. I think ur Bluestacks installation is hosed. A reinstallation is may be needed.
s, tryied the way u said, but still the same errors, my installation is from you link….
should i reinstall???EDIT: tried reinstalling both , still same
Just a Quick Question →
Did you ran the Bluestacks Tweeker “as Administrator” , by right clicking or it , or not..??
if NO then – :/
If Yes then – :/
karthi4052752 wrote:
Dr Anshuman wrote:
karthi4052752 wrote:
initally it was working bro, but now i get these errors
1) when i press change for GUID i get an error “failed to set data for boot parameters”
2) the change advertising id is disabled
3)factory reset, i get an error " error: can’t delete file" – C:programdata/bluestacks/android/data.sparsefs/map
but i am able to delete it manually
While deleting data Bluestacks must not be running. Whereas in order to change different parameters Bluestacks must be running. I think ur Bluestacks installation is hosed. A reinstallation is may be needed.
s, tryied the way u said, but still the same errors, my installation is from you link….
should i reinstall???EDIT: tried reinstalling both , still same
Just a Quick Question →
Did you ran the Bluestacks Tweeker “as Administrator” , by right clicking or it , or not..??
if NO then – :/
If Yes then – :/
Dr Anshuman wrote:
I hv made a short video explaining the above steps abt 1.5MB. This is the last time I spend anytime on this. Should be really easy to follow this. I wont respond to any more PMs. http://www49.zippyshare.com/v/97878352/fil…ml Feel free to skip/Fast Forward the “initialisation” phase.
thanks a lot bro…my mistake, i did not run tweaker as admin, thanks happy 2 prog. karma for u
Not working for me . Whenever i do the process, a dialogue box appears and says – The bluestacks installation is corrupt
Did you disable your antivirus/firewall during downloading & installation?
lootbaba wrote:
Not working for me . Whenever i do the process, a dialogue box appears and says – The bluestacks installation is corrupt
mitra wrote:
Did you disable your antivirus/firewall during downloading & installation?
lootbaba wrote:
Not working for me . Whenever i do the process, a dialogue box appears and says – The bluestacks installation is corrupt
I have no antivirus installed nd yes firewall is disabled
lootbaba wrote:
mitra wrote:
Did you disable your antivirus/firewall during downloading & installation?
lootbaba wrote:
Not working for me . Whenever i do the process, a dialogue box appears and says – The bluestacks installation is corrupt
I have no antivirus installed nd yes firewall is disabled
Try to provide as much information as possible regarding ur issues. Which step exactly? Otherwise its like trying to find a needle in a haystack in complete darkness. My hunch is ur Data & SDCard files hv been deleted. Did u use Bluestacks from the link I posted? Answer each & every question otherwise I wont waste anytime trying to help you.
dr. after i do step 3. Delete Data & SDCard Files(click OK on both) and press start bluestacks my installation gets corrupt …
data and sd card both shows 0mb….what might be the problem
BS 0.9.8 is out. Google apps are built in. Only web installer available as yet.
Offline installer for 0.9.7 was never released & for 0.9.6 was taken down soon after. This does nt bode well for this release as well. Anyways 0.9.7 was significantly worse than its predecessor so I will stick to the latter.
shubhamsharma.ss98467 wrote:
dr. after i do step 3. Delete Data & SDCard Files(click OK on both) and press start bluestacks my installation gets corrupt …
data and sd card both shows 0mb….what might be the problem
Read the instructions carefully or watch the video. Its clear enough.
shubhamsharma.ss98467 wrote:
dr. after i do step 3. Delete Data & SDCard Files(click OK on both) and press start bluestacks my installation gets corrupt …
data and sd card both shows 0mb….what might be the problem
Perhaps you are trying to change the data directory or use the profiles. Do not use those features unless you know exactly what you are doing.
after downloading and installing from the bluestacks download link, i logged into google account to download apps but i am getting “Error in retrieving information xxxx” error.
b.sainarayanarao434 wrote:
after downloading and installing from the bluestacks download link, i logged into google account to download apps but i am getting “Error in retrieving information xxxx” error.
Delete Google account/or clear Google cache in BS Tweaker experimental tab. Relogin.
Bluestacks 0.9.9 is out already! Just a couple of days after 0.9.8 . Still no offline installer in sight tho. Noticeably less laggy. YMMV.
Bluestacks 0.9.9 is out already! Just a couple of days after 0.9.8 . Still no offline installer in sight tho. Noticeably less laggy. YMMV.
Edit: It looks like they hv pulled out 0.9.9 already. What the heck is going on? To discourage rooting they no longer provide offline installers(creating one manually is a PITA). The web installer data can be backed up & used similar to offline one but am yet to try it. The good news: The bugs(app incompatibilities) introduced in 0.9.7 hv mostly been squashed & GApps are built in.
0.9.10 out now! I just wish they would fix the RAM limitation.
I love you !!! Wonderful … !