need help regarding my D-link router
Update – Configuration is complete and the internet is now working. Thanks to all those who helped especially @Tony007 @shoaibmax @guest_999
Final piece of advice which made the internet work was given by none other than @Tony007
Guys need help regarding my d-link router DIR 825. In the evening I had to reset my router because of some net issue but after resetting via the button present at the back of the router, now when I’m trying to open the router login page ip I.e. 192.168.0.1 it shows Tenda as the login page instead of the Dlink page and I’m not able to configure it. I tried 10 times to reset it but it is taking me the tenda login page instead of d-link and I’m not able to access the router for configuration
Tech guys need your help. Tagging some guys who might know how to get it done or please tag someone who can help in this @MrKool_JJ @R0417 @bikidas2060 @drupal @ash @ram   Â
- Sort By
open command prompt in pc & run this command(without quotes):
ipconfig /all
Post the result here.
PC wouldn’t have connected to the Wifi after the hard reset. So, this command o/p may not be useful
192.168.0.1 Are you sure about this?
check the zero and the one’s once again
Many tplink router’s default address is this only.
D-link router default username Admin
password blank
Tenda router default username admin
password admin
Or remove LAN cable as suggested by shoaibmax
Remove the LAN cable from router and turn it on. Connect any device to your router and now you’ll be able to configure it. After configuring everything plug back your LAN cable into the router.
Your ISP is most probably using a Tenda server/hub hence you’re facing this problem.
Yes bro 👊 problem seems like that
Bro Try 192.168.1.1
It won’t work because his current default gateway which is allotting IP address via DHCP is 10.0.0.1.
Good to know your issue is solved, can you post the result of ipconfig /all again as I want to compare your before & after result. Also what happens when you try to open 10.0.0.1 in your browser.
That is the only ip which worked. And still the router configuration is available on this only.
@MrDimer @guest_999