I was getting very low speeds on other devices connected with Flame 2 hotspot so here is one way which may help you if you are facing the same problem on Flame 6 or Flame 2
Step 1: First download and install mHotspot from here: http://www.mhotspot.com/dow...d/
Step 2: Connect internet in your PC/Laptop via USB tethering from your LYF handset.
Step 3: Open mHotspot select and create hotspot name and password for your virtual hotspot which you will be using in devices connecting to this network and also choose the internet source as LAN network(JIO Internet) and create a virtual hotspot.
Now you may connect any device with this virtual hotspot using username and password as we created in Step 3 above and this network will be using JIO 4G data.
You don’t need any physical router to use this trick, though your PC/Laptop should have Wifi adapter with hotspot capabilities.
This would help you to get better Wifi coverage in your home
If mHotspot generates ICS error or your device has problem connecting to this virtual hotspot, then follow the below steps:
Step 1: Open Network and Sharing Center (Via Control Panel)
Click on the blue label of your active internet connection.
( eg. Local area connection,PPOE connection, 3G-USB Connection, etc.)
Step 2: Then a status box will appear, click properties.
Step 3: Go to sharing tab and tick the box,“Allow other users to connect through this computer’s internet connection” and select the wireless network connection 2.
Credits for troubleshoot: http://www.mhotspot.com/legacy/mhotspot-no-inte...