JIO speed reduced ??

@DealSeeker wrote:

@silent6191 wrote:

@DealSeeker wrote:

@GoogleCA wrote:

@DealSeeker Net Velocity App is not even showing the bands after doing the above-mentioned steps. Is this due to Snapdragon SoC or Jio Networks? Just Asking

You are using version 3.2.1 which I linked, right? Because the band information is not available in some versions of the NetVelocity app.

The 3.2.1 version is forcing to update the app to a newer version and then the details along with band info are clearly visible. Don’t install directly from Jio playstore, that’s the one where band info isn’t available. @GoogleCA Install this one as posted by DealSeeker bro then it’ll automatically update to the latest one which have band info details: https://jioappstore.jio.ril.com/cms/uploads/and...

Oh, yes. I forgot that even I was forced to auto-update some time in September. I just checked and I am running v.3.2.6 presently. Both the versions display/displayed the band frequency.

Here is a direct link to v.3.2.6 so people don’t have to go through the auto-update: https://jioappstore.jio.ril.com/cms/uploads/and... CC @GoogleCA ↓

On Band 850

anyone using unlimited ?

@DealSeeker wrote:

By the way, I am getting around 40 Mbps with Airtel 4G inside my house without doing any location-optimization for the signal.

I got the issue now..
My phone does not support Band 40

me too facing speed issue, speed is between 1-2 mbps (generally 1 mbps) on yureka.
Yureka doesn’t allow changing of bands manually.
Netvelocity doesn’t show band info.
Dowloaded LTE Discovery app and it shows band 3 in use after giving root access to it.

how to change band in Qualcomm chipset?

@nac22 wrote:

me too facing speed issue, speed is between 1-2 mbps (generally 1 mbps) on yureka.
Yureka doesn’t allow changing of bands manually.
Netvelocity doesn’t show band info.
Dowloaded LTE Discovery app and it shows band 3 in use after giving root access to it.

@AKA wrote:

anyone using unlimited ?

bhai agar tumhe unlimited mil rhi hai to bta kar jalao na, subah se 128kb vala use kar rha hu . Now thinking I shouldn’t change connection from ACT:-? .

@thrifty_indian wrote:

@nac22 wrote:

me too facing speed issue, speed is between 1-2 mbps (generally 1 mbps) on yureka.
Yureka doesn’t allow changing of bands manually.
Netvelocity doesn’t show band info.
Dowloaded LTE Discovery app and it shows band 3 in use after giving root access to it.

It has mediatek processor? Use MTK engg tool.

Can eny bro help in change the band or eny suggested solution on redmi note 3 ?

@nac22 wrote:

me too facing speed issue, speed is between 1-2 mbps (generally 1 mbps) on yureka.
Yureka doesn’t allow changing of bands manually.
Netvelocity doesn’t show band info.
Dowloaded LTE Discovery app and it shows band 3 in use after giving root access to it.

Remember to open the app and click on More > Settings to enable “Advanced Mode”.

@DealSeeker wrote:

@nac22 wrote:

me too facing speed issue, speed is between 1-2 mbps (generally 1 mbps) on yureka.
Yureka doesn’t allow changing of bands manually.
Netvelocity doesn’t show band info.
Dowloaded LTE Discovery app and it shows band 3 in use after giving root access to it.

Download version 3.2.6 of the NetVelocity app linked in the following post and tell me if you still don’t see the band info. https://www.desidime.com/forums/dost-and-dimes/t...

Remember to open the app and click on More > Settings to enable “Advanced Mode”.

@nac22 wrote:

@DealSeeker wrote:

@nac22 wrote:

me too facing speed issue, speed is between 1-2 mbps (generally 1 mbps) on yureka.
Yureka doesn’t allow changing of bands manually.
Netvelocity doesn’t show band info.
Dowloaded LTE Discovery app and it shows band 3 in use after giving root access to it.

Download version 3.2.6 of the NetVelocity app linked in the following post and tell me if you still don’t see the band info. https://www.desidime.com/forums/dost-and-dimes/t...

Remember to open the app and click on More > Settings to enable “Advanced Mode”.

Hi bro,
Advanced option is on in the same app version but under BAND it shows dash “-”.

@DealSeeker wrote:

@avgn wrote:

@Manish Taneja wrote:

Since morning I have used only 1.85 Gb but I got msg from Jio that you have consumed 4 Gb.

The counter doesn’t reset at 12 midnight

You like to keep the other person guessing for the full information, eh?

@Manish Taneja The data counter-reset time is different for each SIM. To know what time your data counter resets, just login to http://www.J...om and check exactly what time the “Jio Welcome Offer” was activated for your connection under “recharge history”. This would be your data-reset time everyday.

@optimistic wrote:

@nac22 wrote:

@DealSeeker wrote:

@nac22 wrote:

me too facing speed issue, speed is between 1-2 mbps (generally 1 mbps) on yureka.
Yureka doesn’t allow changing of bands manually.
Netvelocity doesn’t show band info.
Dowloaded LTE Discovery app and it shows band 3 in use after giving root access to it.

Download version 3.2.6 of the NetVelocity app linked in the following post and tell me if you still don’t see the band info. https://www.desidime.com/forums/dost-and-dimes/t...

Remember to open the app and click on More > Settings to enable “Advanced Mode”.

Hi bro,
Advanced option is on in the same app version but under BAND it shows dash “-”.

same for me. i am also not able to figure out my band. @DealSeeker

Generated a jio code . Didnt keep a screenshot (Rookie mistake)
Now I can not see that in myjio app. Any solution to this?

PS – Phone not rooted

@DealSeeker @GoogleCA

@thunderguy wrote:

Generated a jio code . Didnt keep a screenshot (Rookie mistake)
Now I can not see that in myjio app. Any solution to this?

PS – Phone not rooted

@DealSeeker @GoogleCA

You should be able to see it again. Earlier it was automatically saved in images. Check there

@GoogleCA wrote:

@thunderguy wrote:

Generated a jio code . Didnt keep a screenshot (Rookie mistake)
Now I can not see that in myjio app. Any solution to this?

PS – Phone not rooted

@DealSeeker @GoogleCA

You should be able to see it again. Earlier it was automatically saved in images. Check there

Not able to. Not saved in Images. Is it necessary to use the code on the same day? Generated it yesterday

@thunderguy wrote:

@GoogleCA wrote:

@thunderguy wrote:

Generated a jio code . Didnt keep a screenshot (Rookie mistake)
Now I can not see that in myjio app. Any solution to this?

PS – Phone not rooted

@DealSeeker @GoogleCA

You should be able to see it again. Earlier it was automatically saved in images. Check there

Not able to. Not saved in Images. Is it necessary to use the code on the same day? Generated it yesterday

No it’s valid till 31st December. Are you on Jio Network? If you are already on Jio Network then you won’t be able to see it.

Nope. Tried mobile data (Vodafone) and Wifi. Doesnt work either way now

@GoogleCA

Speed comparison on 850Mhz and 2300Mhz on same location in a duration of 20 minutes. Took three tests on each band and both were identical. For some reason the enterprise edition fails to test latency,jitter and data loss.

picture upload

image upload free

My theory is 2300Mhz too much congestion hence the websites don’t open and data loss is high. Switching to other bands may help those who are facing bad speed.
CC: @DealSeeker
Edit: I have also checked on places with better signal strength/quality but that didn’t improve anything hence more likely a congestion issue.

@19 Female Gurgaon wrote:

@GoogleCA wrote:

@DealSeeker wrote:

By the way, I am getting around 40 Mbps with Airtel 4G inside my house without doing any location-optimization for the signal.

Same here. I get 20-25 mbps on Airtel

But I have done the smartest thing.
I have shifted my office to a building with Jio towers on rooftop!

@sahilchaudhry08 wrote:

I have Redmi 3s and iphone 6s. So when I try calling in remdi 3s and whenever network has interconnect issues the ivr says all lines are busy but when i try calling in iphone then it simply shows me call failed which means that my phone not catching volte. Searched couple of places on google and youtue but not able to find a solution

did u have jio4G voice app installed in ur device, because one of my friend also facing the same issue but i installed this app in his mobile and then the volte option is available in his device but the device is lg g3 not iphone, so try it once again

in hyderabad if ookla speed test we do mean its showing the speed 15 to 20 mbps

@mohd1.ahmeds123753 wrote:

in hyderabad if ookla speed test we do mean its showing the speed 15 to 20 mbps

but while downloading the speed is not able to download even 500kbps per second that’s a difference between ookla speed test and downloading speed

My jio is not even getting signal today
Miyagi, Hyderabad

nything can be done in jiofi to improve speed..band change??

No.of customers increased in your area

@Achilles wrote:

My jio is not even getting signal today
Miyagi, Hyderabad

Jio internet not working in my area today. Only Google websites working. Calling is working fine. Speeds purely depend on subscriber density in the area. In my house which is located in the heart of the city I barely get 1-2 Mbps while yesterday I went to a few villages and speeds there were hovering between 25-40 Mbps.

[Duplicate post; check the next post]